You just clicked a link to go to another website. If you continue, you will leave this site and go to a site run by someone else.
It is possible that some of the products on the other site are not approved in your country.
The content on this site may not be allowed under the laws of your country of residence. Please review the applicable healthcare laws in your country. If not allowed, please exit this site. Medtronic declines any liability as to your access to such information.
Click “Continue” to close this window and view the site’s content.
Your browser is out of date
With an updated browser, you will have a better Medtronic website experience. Update my browser now.
Medtronic, Inc. (“Medtronic”) offers RemoteView, which permits a user (“Programmer User”) of the Medtronic CareLink® 2090 Programmer (“Programmer”) to allow the viewing of information presently displayed on the Programmer screen with one or more individuals in remote locations anywhere in the world (“Remote Viewer”), including remote health care professionals or Medtronic representatives.
Limited License Grant. You are hereby granted a nonexclusive, nontransferable, terminable, nonassignable, nonsublicensable, limited license to install and use a copy of the Licensed Software solely for authorized and legitimate purposes. You may not otherwise copy, use, modify, reverse engineer, decompile, disassemble, create derivative works based on, or integrate with other systems or programs the Licensed Software without the prior written consent of Medtronic. You shall have sole responsibility for any fees or charges, including service or data charges, incurred by you in connection with your use of the Licensed Software. You shall not remove any proprietary or other legend or restrictive notice contained or included in the Licensed Software or other documentation associated with such Licensed Software. You agree to maintain any and all copyright, trademark, and other notices on the Licensed Software and any associated documentation.
Licensed Software Functionality and Data Use, Collection, Viewing, and Transfer.
“Active Remote Viewer” as referred to herein shall mean a Remote Viewer that has installed the Licensed Software and has at the relevant point in time an active network connection to a Medtronic server via the Licensed Software.
By installing or using the Licensed Software or clicking any acceptance button in connection with this Agreement, you acknowledge, understand, agree to, and consent to all of the following, including when you are an Active Remoter User:
) Registration. To obtain access to the Licensed Software, you must register at the Medtronic RemoteView website and establish a user name and password. All information that you provide in connection with such registration must be complete, accurate, and truthful. The user name and password are personal to you and must not be shared with anyone else. You will also not attempt, directly or indirectly, to disable, bypass, or defeat any password protection associated with the Licensed Software. Medtronic reserves the right to deny or disable any user name or password or request for any user name or password.
) Your Personal Information. Medtronic will collect information in connection with your registration and installation and use of the Licensed Software, including your first and last name, your email address, a selected security question(s) and your corresponding answer(s), your address, and your telephone number. You agree that Medtronic may store this personal information about you on a Medtronic server, including a server located in the United States of America.
) Session Key. To view the information on the Programmer, the Remote Viewer must generate a Session Key that must be shared with and entered by the Programmer User. “Session Key” as used herein means a unique token active for a limited period of time generated by the Remote Viewer. You agree not to share this Session Key with anyone other than the Programmer User who has initiated the specific session.
) Logging of Session Activity. Each time you log in to the Licensed Software, Medtronic will collect information about your activity, including in an aggregated log or database, regarding you and your session, including your name, username, computer name, IP address, operating system details, and session details (including transferring and sharing activity, start and end times, view only or control activity, and any chat messages between or among any Active Remote Viewers. You agree that Medtronic may store any personal information about you on a Medtronic server, including a server located in the United States of America.
) Active Remote Users. When you are an Active Remote Viewer: (1) you will be able to view the name and/or user name of any other Active Remote Viewer who is logged into the same Medtronic server; and (2) any other Active Remote Viewer who is actively logged into the same Medtronic server will be able to view your name and/or user name. The Licensed Software also permits one Active Remote Viewer to share the information being viewed to any other Active Remote Viewer. You must not share any information from the Medtronic programmer, including with any other Active Remote Viewer, absent the express permission from the Programmer User that is allowing you to view the information.
) Availability. Medtronic has limitations on the number of users that can concurrently log in to the Licensed Software at any given time. Thus, installation of or accessing the Licensed Software does not guarantee that it will be available to you for use at any time.
Permissions. By installing and using the Licensed Software, you represent that you have permission to do so from any associated clinic, hospital, or medical practice and that your use of the Licensed Software complies with any policies or requirements of such associated clinic, hospital, or medical practice. You are also responsible for confirming that the Programmer User has obtained any necessary patient consent before allowing you to view any patient information via the Licensed Software.
Your Acknowledgements. You acknowledge that the Licensed Software is not the exclusive method of viewing information from the Programmer and that the Licensed Software is not the exclusive method by which to obtain a patient’s implanted cardiac device data, including any data on the Programmer. You also acknowledge that the Licensed Software is not intended to be used as a life-sustaining or interventional tool during medical emergencies. You further acknowledge that Medtronic is not, and shall not be deemed to be, a provider of patient health care services by virtue of its provision of access to the Programmer screen information via the Licensed Software. You also acknowledge that information from the Licensed Software is not an electronic medical record and use of the Licensed Software does not in any way relieve you from using your best medical judgment to determine a proper course of treatment for patients.
Security/Privacy of Patient Data. Your use of the Licensed Software and any Session Keys shall be solely for legitimate and lawful purposes and not for any malicious purpose. You are solely responsible for and will use your best efforts in maintaining the confidentiality and security of any copies of the Licensed Software as well as any user name, password credentials, and any Session Keys that can be used in accessing the Licensed Software, a Medtronic server, or any information from a Programmer. You are solely responsible for and will use your best efforts in keeping any patient information you may receive or view in connection with the Licensed Software confidential and secure, and you will not attempt to capture or copy any patient information you view in any electronic or hard copy format without the express permission of the Programmer User. You will be responsible for any obligations or liabilities associated with any lost, stolen, or otherwise compromised patient information.
Reporting Issues and Feedback. You agree that you will report any issues or questions, technical or otherwise, regarding the Licensed Software promptly and directly to Medtronic. If you submit any comments or ideas to Medtronic, in the absence of a separate agreement regarding such submissions, you grant to Medtronic an unrestricted, royalty-free, irrevocable license to use, reproduce, display, perform, modify, transmit, and distribute such ideas in any medium and agree that Medtronic is free to use them for any purpose. In addition, Medtronic has no obligation to provide continued maintenance and support to you in connection with the Licensed Software. Any maintenance and support services provided by Medtronic shall be at Medtronic’s sole discretion.
Limitations of Liability.
THE LICENSED SOFTWARE IS PROVIDED TO YOU “AS IS,” AND MEDTRONIC EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES WITH RESPECT TO THE LICENSED SOFTWARE AND YOUR USE THEREOF, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE, AND NONINFRINGEMENT. MEDTRONIC DOES NOT WARRANT THAT THE USE OF THE LICENSED SOFTWARE WILL BE UNINTERRUPTED OR ERROR-FREE.
Legal Compliance. You shall at all times use the Licensed Software in compliance with all applicable laws. You shall ensure that your installation and use of the Licensed Software complies with all applicable export and import laws, regulations, orders, and policies of the United States of America and any other applicable jurisdiction. You represent and warrant that (i) you are not located in a country that is subject to a U.S. Government embargo, or that has been designated by the U.S. Government as a “terrorist supporting” country, and (ii) you are not listed on any U.S. Government list of prohibited or restricted parties.
Term, Termination, Modifications, and Support. This Agreement shall be in effect from the date when you first install or use the Licensed Software. Medtronic may modify, amend, or terminate this Agreement at any time, including by providing notices or an updated version of this Agreement on a Medtronic website. Medtronic may modify, disable, or terminate your use or Medtronic’s support of the Licensed Software at any time, including by providing notices on a Medtronic website. All obligations which are ongoing in nature shall survive termination or expiration of this Agreement. At any time upon Medtronic’s request (including via a notice on a Medtronic website), you agree to promptly delete and terminate use of any and all copies of the Licensed Software. In addition, upon Medtronic’s request, you agree to provide written verification that you have destroyed all copies of the Licensed Software together with the manner, date, and time of such destruction.
NayaMed International Sárl Customers: Whether the RemoteView feature shall be used in connection with NayaMed customers or devices shall be solely within the discretion of NayaMed International Sárl. If the Licensed Software is used connection with NayaMed customers or devices, this Agreement shall be directly between you and NayaMed with respect to those uses.
FDA expands approved use of revolutionary technology.
Singing has always been central to Ron Hargrave’s life. As a young man he even went to Hollywood to write songs and perform. But at age 89, he began feeling too tired to walk more than half a block. And worse for Ron, he couldn’t draw enough breath to sing.
“I was going down the tubes,” he said. “Old man time was moving in.”
Doctors diagnosed him with severe aortic stenosis, a narrowing of the aortic heart valve that obstructs blood flow and forces the heart to work harder to pump blood to the body. Without a new valve, Ron could die.
Typically, heart valve replacement involves invasive open-heart surgery – cutting open the chest and cutting through the breastbone – then removing the diseased valve and sewing in a new, artificial valve. But due to Ron’s age and weakness, and the fact that he had undergone an earlier open-heart surgery for a different problem, doctors considered him a high-risk patient who might not survive another open-heart surgery.
Mary Schoenbaum, RN, ACNP, valve clinic coordinator
“Ron’s symptoms were rather advanced. We thought a CoreValve device would be an excellent option,” said cardiothoracic surgeon Mark Cunningham.
The CoreValve Evolut TAVR System is a self-expandable valve inserted into the heart without open-heart surgery. The valve is squeezed down to roughly the width of a pencil, and then inserted into the body, typically through a vein in the groin or upper chest. It’s then guided into the heart and deployed, where it expands to take over for the diseased valve.
The procedure is known as transcatheter aortic valve replacement (TAVR). (Watch a video to see how the CoreValve™ Evolut™ TAVR platform works.)
“When I walked into the unit the following day, all of the nurses came up to me and said ‘you have to go and see Mr. Hargrave. He’s been singing,’” said Mary Schoenbaum, RN, ACNP and the valve clinic coordinator.
The Food and Drug Administration (FDA) originally approved the minimally-invasive device for cases like Ron’s – where patients are so sick or so frail they are at high-risk of not surviving open-heart surgery. But in July of 2017, the FDA approved the CoreValve Evolut platform’s use for even more patients, to include those considered at intermediate risk of dying during open-heart surgery.
“At Medtronic, we take pride in our ability to generate meaningful clinical evidence that founds our products and therapies in strong science,” said Pieter Kappetein, M.D., Ph.D., vice president, chief medical officer of the Structural Heart business, a part of Medtronic’s Cardiac and Vascular Group. “We continue to invest in clinical trials, the results of which will help shape the future of cardiac care, especially in the heart valve space.”
A Medtronic-sponsored non-inferiority study called SURTAVI found as secondary endpoints that intermediate-risk patients treated with the CoreValve system recovered faster, left the hospital sooner and suffered fewer post-procedure strokes than patients who underwent open-heart surgery.
Ron, who was considered high-risk at the time of his procedure, was already feeling well enough in the Intensive Care Unit to give his nurses a thumbs-up. Today the life-long musician sings the praises of CoreValve. “It brought my life back as it was.” (Watch more of Ron’s story.)
INDICATIONS The Medtronic CoreValve™ Evolut™ R and CoreValve™ Evolut™ PRO systems are indicated for relief of aortic stenosis in patients with symptomatic heart disease due to severe native calcific aortic stenosis who are judged by a heart team, including a cardiac surgeon, to be at intermediate or greater risk for open surgical therapy (i.e., Society of Thoracic Surgeons [STS] predicted risk of operative mortality score ≥3% at 30 days and other clinical comorbidities unmeasured by the STS risk calculator).
The Medtronic CoreValve™ Evolut™ R and CoreValve™ Evolut™ PRO system are indicated for use in patients with symptomatic heart disease due to failure (stenosed, insufficient, or combined) of a surgical bioprosthetic aortic valve who are judged by a heart team, including a cardiac surgeon, to be at high or greater risk for open surgical therapy (i.e., STS predicted risk of operative mortality score ≥8% or at a ≥15% risk of mortality at 30 days).
CONTRAINDICATIONS The CoreValve Evolut R and PRO systems are contraindicated for patients presenting with any of the following conditions: known hypersensitivity or contraindication to aspirin, heparin (HIT/HITTS) and bivalirudin, ticlopidine, clopidogrel, Nitinol (Titanium or Nickel), or sensitivity to contrast media, which cannot be adequately premedicated; ongoing sepsis, including active endocarditis; preexisting mechanical heart valve in the aortic position.
WARNINGS General Implantation of the CoreValve Evolut R and PRO systems should be performed only by physicians who have received Medtronic CoreValve training. This procedure should only be performed where emergency aortic valve surgery can be performed promptly. Mechanical failure of the delivery catheter system and/or accessories may result in patient complications. Accelerated deterioration of the bioprosthesis may occur in patients presenting with an altered calcium metabolism.
PRECAUTIONS General The safety and effectiveness of the CoreValve Evolut R and PRO systems have not been evaluated in the pediatric population. The safety and effectiveness of the bioprosthesis for aortic valve replacement have not been evaluated in the following patient populations: patients who do not meet the criteria for symptomatic severe native aortic stenosis as defined: (1) symptomatic severe high gradient aortic stenosis — aortic valve area ≤1.0 cm2 or aortic valve area index ≤0.6 cm2m2, a mean aortic valve gradient ≥40 mm Hg; or a peak aortic-jet velocity ≥4.0 m/s, (2) symptomatic severe low-flow, low-gradient aortic stenosis — aortic valve area ≤1.0cm2 or aortic valve area index ≤0.6 cm2/m2, a mean aortic valve gradient <40 mmHg; and a peak aortic-jet velocity <4.0 m/s ; who are at low surgical risk (predicted perioperative mortality risk of <3%); with untreated, clinically significant coronary artery disease requiring revascularization; with a pre-existing prosthetic heart valve with a rigid support structure in either the mitral or pulmonic position if either the pre-existing prosthetic heart valve could affect the implantation or function of the bioprosthesis or the implantation of the bioprosthesis could affect the function of the pre-existing prosthetic heart valve; with cardiogenic shock manifested by low cardiac output, vasopressor dependence, or mechanical hemodynamic support. The safety and effectiveness of a CoreValve Evolut R and PRO bioprosthesis implanted within a failed pre-existing transcatheter bioprosthesis has not been demonstrated. Implanting a CoreValve Evolut R or PRO bioprosthesis in a degenerated surgical bioprosthesis [transcatheter aortic valve in surgical aortic valve (TAV in SAV)] should be avoided in the following conditions. The degenerated surgical bioprosthesis presents with: a significant concomitant perivalvular leak (between the prosthesis and the native annulus), is not securely fixed in the native annulus, or is not structurally intact (e.g., wireform frame fracture); partially detached leaflet that in the aortic position may obstruct a coronary ostium; stent frame with a manufacturer’s labeled inner diameter <17 mm. The safety and effectiveness of the bioprosthesis for aortic valve replacement have not been evaluated in patient populations presenting with the following: blood dyscrasias as defined: leukopenia (WBC <1000 cells/mm3), thrombocytopenia (platelet count <50,000 cells/mm3), history of bleeding diathesis or coagulopathy, or hypercoagulable states; congenital bicuspid or unicuspid valve; mixed aortic valve disease (aortic stenosis and aortic regurgitation with predominant aortic regurgitation [3-4+]); moderate to severe (3-4+) or severe (4+) mitral or severe (4+) tricuspid regurgitation; hypertrophic obstructive cardiomyopathy; new or untreated echocardiographic evidence of intracardiac mass, thrombus, or vegetation; native aortic annulus size <18 mm or >30 mm for CoreValve Evolut R and <18 mm or >26 mm for CoreValve Evolut PRO per the baseline diagnostic imaging or surgical bioprosthetic aortic annulus size <17 mm or >30 mm for CoreValve Evolut R and <17 mm or >26 mm for CoreValve Evolut PRO; transarterial access not able to accommodate an 18 Fr sheath or the 14 Fr equivalent EnVeo™ R InLine sheath when using Model ENVEOR-US or transarterial access not able to accommodate a 20 Fr introducer sheath or the 16 Fr equivalent EnVeo™ R InLine sheath when using Model ENVEOR-N-US; sinus of valsalva anatomy that would prevent adequate coronary perfusion; moderate to severe mitral stenosis; severe ventricular dysfunction with left ventricular ejection fraction (LVEF) <20%; symptomatic carotid or vertebral artery disease; severe basal septal hypertrophy with an outflow gradient.
Prior to Use Exposure to glutaraldehyde may cause irritation of the skin, eyes, nose, and throat. Avoid prolonged or repeated exposure to the vapors. Damage may result from forceful handling of the catheter. Prevent kinking of the catheter when removing it from the packaging. This device was designed for single patient use only. Do not reuse, reprocess, or resterilize this product. Reuse, reprocessing, or resterilization may compromise the structural integrity of the device and/or create a risk of contamination of the device, which could result in patient injury, illness, or death. The bioprosthesis size must be appropriate to fit the patient’s anatomy. Proper sizing of the device is the responsibility of the physician. Refer to Instructions for Use for available sizes. Failure to implant a device within the sizing matrix could lead to adverse effects such as those listed below. Patients must present with access vessel diameters of ≥5 mm when using Model ENVEOR-US or ≥5.5 mm when using Model ENVEOR-N-US, or patients must present with an ascending aortic (direct aortic) access site ≥60 mm from the basal plane for both systems. Implantation of the bioprosthesis should be avoided in patients with aortic root angulation (angle between plane of aortic valve annulus and horizontal plane/vertebrae) of >30° for right subclavian/axillary access or >70° for femoral and left subclavian/axillary access. Use caution when using the subclavian/axillary approach in patients with a patent LIMA graft or patent RIMA graft. For direct aortic access, ensure the access site and trajectory are free of patent RIMA or a pre-existing patent RIMA graft.
During Use For direct aortic and subclavian access procedures, care must be exercised when using the tip-retrieval mechanism to ensure adequate clearance to avoid advancement of the catheter tip through the bioprosthesis leaflets during device closure. For direct aortic access procedures, use a separate introducer sheath; do not use the EnVeo R InLine sheath. Adequate rinsing of the bioprosthesis with sterile saline, as described in the Instructions for Use, is mandatory before implantation. During rinsing, do not touch the leaflets or squeeze the bioprosthesis. If a misload is detected, unsheath the bioprosthesis and examine the bioprosthesis for damage (for example, permanent frame deformation, frayed sutures, or valve damage). Do not attempt to reload a damaged bioprosthesis. Do not load the bioprosthesis onto the catheter more than two times or after it has been inserted into a patient. Use the deployment knob to deploy and recapture the bioprosthesis. Do not use the trigger for deploying or recapturing because it could cause inaccurate placement of the bioprosthesis. Once the radiopaque capsule marker band reaches the distal end of the radiopaque paddle attachment (point of no recapture), retrieval of the bioprosthesis from the patient is not recommended. Retrieval after the point of no recapture may cause mechanical failure of the delivery catheter system, aortic root damage, coronary artery damage, myocardial damage, vascular complications, prosthetic valve dysfunction (including device malposition), embolization, stroke, and/or emergent surgery. During deployment, the bioprosthesis can be advanced or withdrawn as long as annular contact has not been made. Once annular contact is made, the bioprosthesis cannot be advanced in the retrograde direction; recapture until the bioprosthesis is free from annular contact, and then reposition in the retrograde direction. If necessary, and the radiopaque capsule marker band has not yet reached the distal end of the radiopaque paddle attachment, the bioprosthesis can be withdrawn (repositioned) in the antegrade direction. However, use caution when moving the bioprosthesis in the antegrade direction. While the catheter is in the patient, ensure the guidewire is extending from the tip. Do not remove the guidewire from the catheter while the catheter is inserted in the patient. Use the handle of the delivery system to reposition the bioprosthesis. Do not use the outer catheter sheath. There will be some resistance when the catheter is advanced through the vasculature. If there is a significant increase in resistance, stop advancement and investigate the cause of the resistance (for example, magnify the area of resistance) before proceeding. Do not force passage. Forcing passage could increase the risk of vascular complications (for example, vessel dissection or rupture). Persistent force on the catheter can cause the catheter to kink which could increase the risk of vascular complications (for example, vessel dissection or rupture).Once deployment is complete, repositioning of the bioprosthesis is not recommended. Repositioning of a deployed valve may cause aortic root damage, coronary artery damage, myocardial damage, vascular complications, prosthetic valve dysfunction (including device malposition), embolization, stroke, and/or emergent surgery. Do not attempt to retrieve or to recapture a bioprosthesis if any one of the outflow struts is protruding from the capsule. If any one of the outflow struts has deployed from the capsule, the bioprosthesis must be released from the catheter before the catheter can be withdrawn. Ensure the capsule is closed before catheter removal. When using a separate introducer sheath, if increased resistance is encountered when removing the catheter through the introducer sheath, do not force passage. Increased resistance may indicate a problem and forced passage may result in damage to the device and/or harm to the patient. If the cause of resistance cannot be determined or corrected, remove the catheter and introducer sheath as a single unit over the guidewire, and inspect the catheter and confirm that it is complete. Clinical long-term durability has not been established for the bioprosthesis. Evaluate bioprosthesis performance as needed during patient follow-up. Post procedure, administer appropriate antibiotic prophylaxis as needed for patients at risk for prosthetic valve infection and endocarditis. Post procedure, administer anticoagulation and/or antiplatelet therapy per physician/clinical judgment. Excessive contrast media may cause renal failure. Pre procedure, measure the patient’s creatinine level. During the procedure, monitor contrast media usage. Conduct the procedure under fluoroscopy. The safety and efficacy of a CoreValve Evolut R or CoreValve Evolut PRO bioprosthesis implanted within a transcatheter bioprosthesis have not been demonstrated. However, in the event that a CoreValve Evolut R or CoreValve Evolut PRO bioprosthesis must be implanted within a transcatheter bioprosthesis to improve valve function, valve size and patient anatomy must be considered before implantation of the CoreValve Evolut R or CoreValve Evolut PRO bioprosthesis to ensure patient safety (for example, to avoid coronary obstruction). In the event that valve function or sealing is impaired due to excessive calcification or incomplete expansion, a post-implant balloon dilatation of the bioprosthesis may improve valve function and sealing. To ensure patient safety, valve size and patient anatomy must be considered when selecting the size of the balloon used for dilatation. The balloon size chosen for dilatation should not exceed the diameter of the native aortic annulus or, for surgical bioprosthetic valves, the manufacturer’s labeled inner diameter. Refer to the specific balloon catheter manufacturer's compliance chart to ensure that the applied inflation pressure does not result in a balloon diameter that exceeds the indicated annulus range for the bioprosthesis. Refer to the specific balloon catheter manufacturer’s labeling for proper instruction on the use of balloon catheter devices.
Note: Bench testing has only been conducted to confirm compatibility with NuMED Z-MEDTMand Z-MED IITM Balloon Aortic Valvuloplasty catheters where CoreValve Evolut R and CoreValve Evolut PRO bioprosthesis device performance was maintained after dilation. Data on File.
POTENTIAL ADVERSE EVENTS Potential risks associated with the implantation of the CoreValve Evolut R or CoreValve Evolut PRO transcatheter aortic valve may include, but are not limited to, the following: • death • myocardial infarction, cardiac arrest, cardiogenic shock, cardiac tamponade • coronary occlusion, obstruction, or vessel spasm (including acute coronary closure) • cardiovascular injury (including rupture, perforation, tissue erosion, or dissection of vessels, ascending aorta trauma, ventricle, myocardium, or valvular structures that may require intervention) • emergent surgical or transcatheter intervention (for example, coronary artery bypass, heart valve replacement, valve explant, percutaneous coronary intervention [PCI], balloon valvuloplasty) • prosthetic valve dysfunction (regurgitation or stenosis) due to fracture; bending (out-of-round configuration) of the valve frame; underexpansion of the valve frame; calcification; pannus; leaflet wear, tear, prolapse, or retraction; poor valve coaptation; suture breaks or disruption; leaks; mal-sizing (prosthesis-patient mismatch); malposition (either too high or too low)/malplacement • prosthetic valve migration/embolization • prosthetic valve endocarditis • prosthetic valve thrombosis • delivery catheter system malfunction resulting in the need for additional re-crossing of the aortic valve and prolonged procedural time • delivery catheter system component migration/embolization • stroke (ischemic or hemorrhagic), transient ischemic attack (TIA), or other neurological deficits • heart failure • cardiac failure or low cardiac output • ancillary device embolization • individual organ (for example, cardiac, respiratory, renal [including acute kidney failure]) or multi-organ insufficiency or failure • major or minor bleeding that may require transfusion or intervention (including life-threatening or disabling bleeding) • vascular access-related complications (e.g., dissection, perforation, pain, bleeding, hematoma, pseudoaneurysm, irreversible nerve injury, compartment syndrome, arteriovenous fistula, stenosis) • mitral valve regurgitation or injury • conduction system disturbances (for example, atrioventricular node block, left-bundle branch block, asystole), which may require a permanent pacemaker • infection (including septicemia) • hypotension or hypertension • hemolysis • peripheral ischemia • bowel ischemia • abnormal lab values (including electrolyte imbalance) • allergic reaction to antiplatelet agents, contrast medium, or anesthesia • exposure to radiation through fluoroscopy and angiography • permanent disability.
Please reference the CoreValve Evolut R and CoreValve Evolut PRO Instructions for Use for more information regarding indications, warnings, precautions, and potential adverse events.
CAUTION Federal law (USA) restricts this device to sale by or on the order of a physician.
Disclaimer: This page may include information about products that may not be available in your region or country. Please consult the approved indications for use. Content on specific Medtronic products is not intended for users in markets that do not have authorization for use.